الشميري
29-03-2004, 11:16 PM
بسم الله الرحمن الرحيم
المحطة التالية تحدث عن البروتوكول Telnet
بعد قراءة هذا الموضوع ستكون قادر على
فهم معنى خدمة التلنت
معرفة مكان تشغيل الخدمة والتحكم بها
تمرين التثبيت وإستخدام التلنت
تشغيل وإيقاف التلنت
الخيارات المتاحه على ملقم التلنت
إصطياد المشاكل مع رسائل التلنت
تمرين تشغيل وإستخدام التلنت
TCP/IP
IP Address
FTP
Telnet
NetBIOS
DHCP
DNS
بروتوكولات الويندوز
نور للكمبيوتر والاتصالات
خدمة الشبكات
خدمة التلنت في ويندوز 2000 تسمح لمستخدمين عميل التلنت بالإتصال بكمبيوتر يشغل خدمة التلنت وإستعمال سطر الأوامر ويصبح كما لو كان يجلس أمامه ، ويمكن أن تكون خدمة التلنت عبارة لإتصال المستخدمين مع بعضهم البعض
وأي كمبيوتر يشغل خدمة التلنت يمكن أن يدعم إلى 63 عميل تلنت في أي وقت
Telnet Authentication
You can use your local Windows 2000 user name and password or domain account information to access the Telnet server. The security scheme is integrated into Windows 2000 security. If you do not use the NT LAN Manager (NTLM) authentication option, the user name and password are sent to the Telnet server as plain text.s 2000 security context for authentication and the user is not prompted for a user
If you are using NTLM authentication, the client uses the Windowname and password. The user name and password are encrypted.يمكن استعمال اسمك وكلمة المرور الخاصه بك من اجل الوصول إلى ملقم التلنت ، إذا كنت تستخدم خيار التحقق من الصحة NTLM سيرسل الاسم و كلمة المرور مشفرة وإذا لم تكن مستخدمة سترسل كنص عادي
ملاحظة
If the User Must Change Password At Next Logon option is set for a user, the user cannot log on to the Telnet service when NTLM authentication is used. The user must log on to the server directly and change the password, and then log on through the Telnet client. إذا كان هذا الخيار منشط في خصائص كلمة المرور لأحد المستخدمين لن يتمكن من الدخول على ملقم التلنت عند إستخدام NTLM يجب الدخول ثم تغير كلمة المرور ثم التسجيل على خدمة التلنت
تشغيل و إيقاف ملقم التلنت
In a Windows 2000 Server default installation, the Telnet service is set to manual startup. You can use the Services snap-in or the Computer Management snap-in to start, stop, or configure the Telnet service for automatic startup. في التثبيت الافتراضي لويندوز 2000 تكون خدمة التلنت غير منشطة وتكون على الوضع اليدوي ، ويمكن إستخدام الأداة Services لتشغيل أو إيقاف خدمة التلنت
مكان التلنت
In the Computer Management snap-in, Telnet is a service located under the Services and Applications node. Select Services from the console tree, and then select Telnet from the list of services in the details pane.
تشغيل التلنت و إيقافة من سطر الاوامر
You can also start or stop the Telnet service from a command prompt. To start Telnet Server, type net start tlntsvr or net start telnet at the command prompt, and then press Enter. To stop Telnet Server, type net stop tlntsvr or net stop telnet at the command prompt, and then press Enter.
الأداة Telnet Server Admin
You can use the Telnet Server Admin utility to start, stop, or get information about Telnet Server. You can also use it to get a list of current users, terminate a user's session, or change Telnet Server registry settings.يمكن إستخدام الأداة Telnet Server Admin لتشغيل أو إيقاف أو الحصول على معلومات عن الملقم ويمكن كذلك الحصول على عدد المستخدمين و التحكم في الجلسة الحالية من إنهاء الإتصال و تغير الاعدادات
لفتح الأداة Telnet Server Admin , أضغط على Telnet Administration Tool الموجودة في Administrative Tools أو اضغط Start, ثم Run, اكتب tlntadmn, ثم OK. إذا كنت لا تستطيع فتح الأداة Telnet Server Admin , تحتاج إلى تثبيت أدوات الإدارة (Adminpak.msi).
يبين الجدول التالي خيارات الأداة Telnet Server Administration
الخيار
الإسم
الوصف
0
Quit this application
ينهي جلسة الأداة Telnet Server Admin
1
List the current users
يبين المستخدمين المتصلين بخدمة التلنت مع توضيح اسم المستخدم و الدومين و وعنوان الجهاز ووقت الدخول
2
Terminate a user session
ينهي جلسة أحد المستخدمين الذي أنت تختاره
3
Display/change registry settings
يزود قائمة بإعدادات السجل التي يمكن تغيرها
4
Start the service
يشغل خدمة التلنت
5
Stop the service
يوقف خدمة التلنت
إصطياد المشاكل
يبين الجدول التالي بعض المشاكل التي يمكن أن تواجهك عند إستخدام التلنت
رسالة الخطاء
السبب
الحل
Invalid input
القيمة المكتوبة لم تكن مقبولة
راجع الخيارات وأعد كتابة خيارك
Failed to open the registry key
خدمة التلنت غير مشتغلة
شغل خدمة التلنت
Failed to query the registry value
خدمة التلنت غير مشتغلة على الملقم
شغل الخدمة
عميل التلنت
You can use Microsoft Telnet Client to connect to a remote computer running the Telnet service or other Telnet server software. Once you have made this connection, you can communicate with the Telnet server. The type of session you conduct depends on how the Telnet software is configured. Communication, games, system administration, and local logon simulations are some typical uses of Telnet.
The Telnet client uses the Telnet protocol, part of the TCP/IP suite of protocols, to connect to a remote computer over a network. The Telnet client software allows a computer to connect to a remote server. You can use the Telnet client provided with Windows 2000 to connect to a remote computer, log on to the remote computer, and interact with it as if you were sitting in front of it.
Users of previous versions of Microsoft's Telnet client may notice a few changes in the version included with Windows 2000. The most obvious change is that Microsoft Telnet Client is now a command-line application rather than a Windows application. As a command-line application, Microsoft Telnet Client will seem very familiar to users of UNIX-based Telnet clients.
An important new feature found in Microsoft Telnet Client is NTLM authentication support. Using this feature, a computer using Microsoft Telnet Client can log on to a Windows 2000 computer running the Telnet service by using NTLM authentication
تحياتي لكم الحارة
المحطة التالية تحدث عن البروتوكول Telnet
بعد قراءة هذا الموضوع ستكون قادر على
فهم معنى خدمة التلنت
معرفة مكان تشغيل الخدمة والتحكم بها
تمرين التثبيت وإستخدام التلنت
تشغيل وإيقاف التلنت
الخيارات المتاحه على ملقم التلنت
إصطياد المشاكل مع رسائل التلنت
تمرين تشغيل وإستخدام التلنت
TCP/IP
IP Address
FTP
Telnet
NetBIOS
DHCP
DNS
بروتوكولات الويندوز
نور للكمبيوتر والاتصالات
خدمة الشبكات
خدمة التلنت في ويندوز 2000 تسمح لمستخدمين عميل التلنت بالإتصال بكمبيوتر يشغل خدمة التلنت وإستعمال سطر الأوامر ويصبح كما لو كان يجلس أمامه ، ويمكن أن تكون خدمة التلنت عبارة لإتصال المستخدمين مع بعضهم البعض
وأي كمبيوتر يشغل خدمة التلنت يمكن أن يدعم إلى 63 عميل تلنت في أي وقت
Telnet Authentication
You can use your local Windows 2000 user name and password or domain account information to access the Telnet server. The security scheme is integrated into Windows 2000 security. If you do not use the NT LAN Manager (NTLM) authentication option, the user name and password are sent to the Telnet server as plain text.s 2000 security context for authentication and the user is not prompted for a user
If you are using NTLM authentication, the client uses the Windowname and password. The user name and password are encrypted.يمكن استعمال اسمك وكلمة المرور الخاصه بك من اجل الوصول إلى ملقم التلنت ، إذا كنت تستخدم خيار التحقق من الصحة NTLM سيرسل الاسم و كلمة المرور مشفرة وإذا لم تكن مستخدمة سترسل كنص عادي
ملاحظة
If the User Must Change Password At Next Logon option is set for a user, the user cannot log on to the Telnet service when NTLM authentication is used. The user must log on to the server directly and change the password, and then log on through the Telnet client. إذا كان هذا الخيار منشط في خصائص كلمة المرور لأحد المستخدمين لن يتمكن من الدخول على ملقم التلنت عند إستخدام NTLM يجب الدخول ثم تغير كلمة المرور ثم التسجيل على خدمة التلنت
تشغيل و إيقاف ملقم التلنت
In a Windows 2000 Server default installation, the Telnet service is set to manual startup. You can use the Services snap-in or the Computer Management snap-in to start, stop, or configure the Telnet service for automatic startup. في التثبيت الافتراضي لويندوز 2000 تكون خدمة التلنت غير منشطة وتكون على الوضع اليدوي ، ويمكن إستخدام الأداة Services لتشغيل أو إيقاف خدمة التلنت
مكان التلنت
In the Computer Management snap-in, Telnet is a service located under the Services and Applications node. Select Services from the console tree, and then select Telnet from the list of services in the details pane.
تشغيل التلنت و إيقافة من سطر الاوامر
You can also start or stop the Telnet service from a command prompt. To start Telnet Server, type net start tlntsvr or net start telnet at the command prompt, and then press Enter. To stop Telnet Server, type net stop tlntsvr or net stop telnet at the command prompt, and then press Enter.
الأداة Telnet Server Admin
You can use the Telnet Server Admin utility to start, stop, or get information about Telnet Server. You can also use it to get a list of current users, terminate a user's session, or change Telnet Server registry settings.يمكن إستخدام الأداة Telnet Server Admin لتشغيل أو إيقاف أو الحصول على معلومات عن الملقم ويمكن كذلك الحصول على عدد المستخدمين و التحكم في الجلسة الحالية من إنهاء الإتصال و تغير الاعدادات
لفتح الأداة Telnet Server Admin , أضغط على Telnet Administration Tool الموجودة في Administrative Tools أو اضغط Start, ثم Run, اكتب tlntadmn, ثم OK. إذا كنت لا تستطيع فتح الأداة Telnet Server Admin , تحتاج إلى تثبيت أدوات الإدارة (Adminpak.msi).
يبين الجدول التالي خيارات الأداة Telnet Server Administration
الخيار
الإسم
الوصف
0
Quit this application
ينهي جلسة الأداة Telnet Server Admin
1
List the current users
يبين المستخدمين المتصلين بخدمة التلنت مع توضيح اسم المستخدم و الدومين و وعنوان الجهاز ووقت الدخول
2
Terminate a user session
ينهي جلسة أحد المستخدمين الذي أنت تختاره
3
Display/change registry settings
يزود قائمة بإعدادات السجل التي يمكن تغيرها
4
Start the service
يشغل خدمة التلنت
5
Stop the service
يوقف خدمة التلنت
إصطياد المشاكل
يبين الجدول التالي بعض المشاكل التي يمكن أن تواجهك عند إستخدام التلنت
رسالة الخطاء
السبب
الحل
Invalid input
القيمة المكتوبة لم تكن مقبولة
راجع الخيارات وأعد كتابة خيارك
Failed to open the registry key
خدمة التلنت غير مشتغلة
شغل خدمة التلنت
Failed to query the registry value
خدمة التلنت غير مشتغلة على الملقم
شغل الخدمة
عميل التلنت
You can use Microsoft Telnet Client to connect to a remote computer running the Telnet service or other Telnet server software. Once you have made this connection, you can communicate with the Telnet server. The type of session you conduct depends on how the Telnet software is configured. Communication, games, system administration, and local logon simulations are some typical uses of Telnet.
The Telnet client uses the Telnet protocol, part of the TCP/IP suite of protocols, to connect to a remote computer over a network. The Telnet client software allows a computer to connect to a remote server. You can use the Telnet client provided with Windows 2000 to connect to a remote computer, log on to the remote computer, and interact with it as if you were sitting in front of it.
Users of previous versions of Microsoft's Telnet client may notice a few changes in the version included with Windows 2000. The most obvious change is that Microsoft Telnet Client is now a command-line application rather than a Windows application. As a command-line application, Microsoft Telnet Client will seem very familiar to users of UNIX-based Telnet clients.
An important new feature found in Microsoft Telnet Client is NTLM authentication support. Using this feature, a computer using Microsoft Telnet Client can log on to a Windows 2000 computer running the Telnet service by using NTLM authentication
تحياتي لكم الحارة